CITI Lab Safety Training Practice Test

These questions are part of the practice quiz. Start practicing

• When should you report unsafe conditions in the lab?
• What is the best way to avoid chemical exposure in the laboratory?
• Which material should never be used to leak-test flammable or oxidizing gas cylinders?
• How many risk-based performance standards (RBPSs) exist in the security vulnerability assessment (SVA)?
• What should you do if equipment emits an unusual odor?
• Which of the following regulates chemical security in the U.S.?
• Why should laboratory doors remain closed at all times?
• What should be done in case of a chemical spill?
• Which of the following may be permissible for disposal down the sanitary sewer?
• What law serves as the foundation for the EPA hazardous waste regulations?
• What materials should never be mixed in the lab?
• How often should safety drills be conducted in a laboratory setting?
• What is the proper way to store compressed gas cylinders?
• What is a key hazard when using chemical substances in the lab?
• How often should a safety audit be conducted in the lab?
• Which Safety Data Sheet (SDS) section provides information about exposure controls and personal protection?
• What is one critical role of a laboratory safety officer?
• What is a best practice after using a dust-mask respirator?
• What is the primary focus of lab safety training?
• Why must flammable liquids be stored in approved cabinets?
• Why are hazard identification and risk assessment critical when handling chemicals?
• What is one key responsibility of laboratory personnel regarding PPE?
• What risks are associated with sharp objects in the laboratory?
• What should you do if you accidentally ingest a hazardous substance?
• What is the primary goal of using Personal Protective Equipment (PPE) in the lab?
• What is the maximum amount of hazardous waste allowed to be accumulated in a satellite accumulation area (SAA)?
• What is the function of safety showers and eyewash stations in the lab?
• What are common symbols found on chemical labels?
• What is an important step before starting any lab experiment?
• What is the purpose of a spill kit in a laboratory?
• During which phase would it be appropriate to think about setting up a fire-suppression system?
• Which of the following should a lab team do in response to a fire alarm?
• What is the significance of conducting a risk assessment in the lab?
• What should be done if a compressed gas cylinder is dented or damaged?
• What are the four types of fires classified by the National Fire Protection Association (NFPA)?
• What must be included in a Laboratory Safety Plan?
• What is the primary purpose of regular safety training in the lab?
• Which of the following is NOT a recommended method of hazard control?
• What is the proper disposal method for empty compressed gas cylinders?
• In a study by ConocoPhillips Marine, how many unsafe acts contributed to one fatality?
• What is the first thing you should do in an emergency?
• How should you transport chemicals within the laboratory?
• What are the four domains that a laboratory security program should follow?
• When is it acceptable to have uncovered skin while handling chemicals?
• What does the acronym PPE stand for in the context of laboratory safety?
• What is the purpose of a Material Safety Data Sheet (MSDS)?
• Which of the following is not a reason for maintaining a clean lab?
• Select the correct order to follow when using a fire extinguisher.
• What is the purpose of a fume hood?
• What type of safety equipment is essential in a laboratory for handling chemicals?
• Why is it necessary to keep chemicals properly labeled?
• Why is it advised to prohibit food and drink in laboratory environments?
• What does PPE stand for in laboratory safety?
• Why is proper labeling of chemical waste crucial?
• Which item is considered personal protective equipment commonly found in laboratories?
• Who must complete CITI Lab Safety Training?
• Why is ventilation important in a laboratory?
• What is a key action to take in case of a fire in the laboratory?
• What is a common characteristic of flammable gas cylinders?
• Which packing group (PG) requires more rigorous packaging to prevent exposures and spills?
• What should you never do in a laboratory?
• What is the danger of working alone in a laboratory?
• When can a lab worker remove their safety goggles?
• When should safety goggles be worn in a laboratory?
• Why is it necessary to keep aisles and exits clear?
• What does the acronym RAMP stand for in lab safety?
• Which agency regulates the shipping of hazardous materials?
• What action should a researcher take when unsure about a chemical's hazard?
• How are explosion-proof and flammable refrigerators and freezers different from domestic refrigerators and freezers?
• How should you store chemicals in the laboratory?
• Who should laboratory personnel consult regarding PPE requirements before starting work?
• How can effective hazard communication standards impact laboratory staff?
• What should be checked regularly in laboratories to prevent chemical dangers?
• What should you do with food and drinks in the laboratory?
• What is the minimum concentration percentage for a substance to be considered a hazardous chemical?
• What is the first personal protective equipment (PPE) item that should be removed after completing work?
• In terms of emergency response, what should a laboratory security system be prepared to do?
• What does "decontamination" entail in a lab setting?
• What should lab personnel do if they are unsure about handling a chemical?
• Why is it important to use the correct disposal methods for hazardous waste?
• What can be done to minimize exposure to airborne contaminants?
• What is an effect of not adhering to proper chemical storage conditions?
• How should you dispose of sharps like needles and blades?
• Which class of fire extinguisher is appropriate to use for an electrical equipment fire?
• What role do hazard communication standards play in laboratory safety?
• What type of information can typically be found on a Material Safety Data Sheet (MSDS)?
• Which of the following is a key practice in laboratory safety?
• In the event of a chemical spill, what is the first step you should take?
• Who is responsible for ensuring safety in the laboratory?
• What is the primary purpose of lab safety training?
• What should be included in a comprehensive chemical inventory?
• Which item is appropriate for cleaning up a liquid chemical spill without broken glass?
• What does "biosafety level" refer to?
• What is the last step after removing all PPE?
• What are the characteristics of a Class A fire?
• What is an example of a biological hazard?
• What should you do with expired chemicals in the lab?
• Which of the following can you store on open shelves in the laboratory?
• What should be done with unused or expired chemicals?
• What is the correct procedure for disposing of hazardous waste?
• Which of the following gases often requires caution due to their oxidizing properties?
• In the event a spill has occurred, and broken glass is present, never pick it up with your bare hands. When broken glass is present, which of the following spill kit items should you use?
• How should you handle spills of hazardous liquids in the lab?
• Which term best describes waste that poses a substantial or potential hazard to human health or the environment?
• Why is it crucial to read labels on chemical containers?
• What kind of information is typically found on a Safety Data Sheet (SDS)?
• Which of the following is not part of the hazard identification for determining PPE requirements?
• What is a chemical hygiene plan?
• What does PPE stand for in the context of laboratory safety?
• Why must you use a specific type of fume hood for perchlorates?
• What should you do first in case of a chemical spill?
• What is a crucial factor in maintaining laboratory safety?
• Which Class of fire involves flammable liquids?
• What is meant by "good laboratory practices" (GLP)?
• What is an important factor in minimizing risks while conducting experiments?
• How should you handle electrical equipment in the lab?
• How often must you complete the DOT hazardous materials shipping training?
• What is the main purpose of emergency eyewashes?
• What precaution should you take when using glassware in the lab?
• What should you do before starting work in the laboratory?
• What type of respirator does not use cartridges?
• Which section of the Safety Data Sheet (SDS) contains information on stability and reactivity?
• Which of the following is NOT a recommended practice for ensuring laboratory safety?
• Which of the following is a special piece of equipment that you must use with flammable gases?
• What information is typically found in Section 1 of a Safety Data Sheet (SDS)?
• What is one common practice to prevent slips, trips, and falls in the laboratory?
• What is a fume hood used for?
• Which document can help you learn about the hazard information of a chemical?
• What do the stamps on each compressed gas cylinder indicate?
• Why is it important to perform risk assessments before an experiment?
• When should you report an unsafe condition in the lab?
• What is the most effective type of hazard control in a laboratory?
• What should you do if you see a colleague engaging in unsafe lab practices?
• How often should you practice and revise emergency plans?
• What is the purpose of safety goggles in the lab?
• What is a safety data sheet (SDS)?
• What is the primary reason for using personal protective equipment (PPE)?
• What effect does proper cylinder label information have in a laboratory?
• What is the importance of keeping workspaces clean in the lab?
• How should chemical containers be closed?
• What is the recommended maximum sash height for operating a chemical fume hood safely?
• When is it appropriate to use a safety shower?
• Which section of the Safety Data Sheet (SDS) contains transportation information?
• What risk do auxiliary air fume hoods pose to workers?
• Which action is essential before leaving the lab at the end of the day?
• What type of fire extinguisher is suitable for electrical fires?
• When should you use a fire extinguisher?
• What type of protective equipment is essential when handling hazardous materials?
• Why is it important to keep aisles clear in a laboratory setting?
• Who is responsible for maintaining safety standards in the lab?
• What is a critical factor in handling chemical waste?
• What is the significance of a fume hood in a laboratory?
• What is a potential effect of a power outage on laboratory operations?
• What should you do if your clothing catches on fire?
• What is an inherent risk when working with electrical equipment in a lab?
• Why is it important to label hazardous materials clearly?
• When is it essential to use a lab coat?
• How often should lab safety training be renewed?
• What precaution should you take when operating machinery in the lab?
• Why is training in emergency response important for lab personnel?
• What is the role of safety data sheets in laboratory safety?
• Why is it important to delay criminal activity in a laboratory setting?
• What should be prioritized during a power outage in the lab?
• What is the first action you should take if an injury occurs in the lab?
• What does "chemical compatibility" mean?
• What type of fire extinguisher is suitable for electrical fires?
• What is an essential part of maintaining a safe lab environment?
• What are two Chemical Facility Anti-Terrorism Standards (CFATS) program resources that can help laboratories develop a laboratory security program?
• What is the impact/likelihood of occurrence for a hurricane to affect a laboratory in Arizona?
• How often should you test peroxide-forming chemicals?
• Which of the following is a potential consequence of ignoring lab safety protocols?
• What should you do if you encounter an unknown chemical spill?
• What information must be present on a chemical label?
• Which of the following is a key component of lab safety protocols?
• Regarding the safe packaging of laboratory chemicals for transport or shipment, you must always do which of the following?
• When should you wear gloves in the lab?
• What is one way in which low-flow fume hood design differs from standard fume hood design?
• What is the primary goal of CITI Lab Safety Training?
• What is the main purpose of a chemical fume hood?
• What type of waste is classified as low-level mixed waste (LLMW)?
• What is an “exposure control plan”?
• You must store quantities of flammable liquids greater than _____ in approved flammable storage cabinets.
• What main risk is associated with flammable materials in the laboratory?
• In case of an emergency, what is the importance of knowing the location of safety equipment?
• Where should large or bulky items be stored in the lab?
• You must only use a ductless fume hood for which of the following?
• What is the appropriate action if a gas leak is detected in the laboratory?
• Which of the following is NOT a reason for having a laboratory security system?
• What type of cabinet is used for storing flammable liquids?
• What is an emergency action plan?
• What is the role of a laboratory safety officer?
• Which type of storage is required for volatile chemicals?
• What is the primary reason for keeping work areas clean and organized in a lab?
• What should you do if you break a glass tube in the lab?
• If the likelihood is high and the impact is high, what will the level of risk be?
• What role do safety signage and labeling play in laboratory safety?
• Why is it important to label all laboratory containers?
• What is the primary purpose of an emergency action plan in a laboratory setting?
• Select the statement that is false.
• What should you do before starting work with a new chemical?
• What are the primary purposes of a laboratory security system?
• What action should be taken before leaving the lab?
• What are the emergency preparation and management phases?
• Why is it critical to report issues like unusual odors in lab equipment?
• Why is proper labeling important in a laboratory?
• Which practice is essential for maintaining a safe laboratory environment?
• At what temperature do refrigerated liquefied gas cylinders operate?
• What general behavior is expected when working in a lab environment?
• How should spills of volatile solvents be handled?
• When should waste be labeled at a satellite accumulation area (SAA)?
• What type of training is essential for lab personnel?
• Why is classroom safety training important for students in labs?
• What is the proper way to smell a chemical?
• What should be done if a chemical is spilled on the skin?
• Which action is crucial when an unexpected chemical reaction occurs?
• What are two resources that help develop a laboratory security program?
• How often should laboratory safety training be conducted?
• What should you do if you feel unwell while working in the lab?
• What should you do immediately after a chemical spill?
• Which of the following is an example of a physical hazard in the lab?
• Which of the following is a proper action for disposing of PPE?
• What is the most appropriate action when dealing with electrical equipment in the lab?
• What type of training is required for handling hazardous materials?
• When should eye protection be used in the lab?
• What are the potential hazards associated with biological materials?
• What is a primary goal of laboratory safety protocols?
• What might be a consequence of not using lab coats when working with hazardous materials?
• What are two examples of appropriate PPE when working with hazardous materials?
• How should you react to a minor cut in the lab?
• Which aspect is most important in a laboratory emergency response plan?
• Which of the following is a key step in laboratory safety protocols?
• Which personal protective equipment is recommended when handling hazardous materials?
• Before starting an experiment, you should check for what important item?
• Which of the following should be immediately reported in a laboratory?
• What is the correct way to dispose of sharps?
• What should be included in a laboratory safety checklist?
• Why should you avoid using personal protective equipment that is damaged?
• Which of the following must be included on the manufacturer's label of a chemical container?
• What should you do if you get a chemical in your eyes?
• What does RCRA stand for in hazardous waste management?
• When should emergency exits in the lab be checked?
• What is the purpose of emergency showers in the lab?
• What is a common requirement for laboratory personnel?
• What is the primary purpose of a Safety Data Sheet (SDS)?
• What type of eye protection is required when working with flying fragments?
• What is the significance of proper storage conditions for chemicals in a lab?
• What type of protection does a lab coat provide?
• What is considered a 'first step' in emergency response?
• What should be worn when handling hazardous chemicals?
• What should be done with caps on gas cylinders when storing them?
• Which organization regulates chemical security in the U.S.?
• What is the proper response to a chemical spill in the laboratory?